How make invisible switch to be visible?

Zed5Duke · Post by **Zed5Duke** » Sun Jan 03, 2010 12:05 pm

I placed invisible switch on wall and i cant make it visible by other switch. Tryed toggle and activate and its still invisible.

beowuuf · Post by **beowuuf** » Sun Jan 03, 2010 12:30 pm

Is this a lever? Try a normal switch (no toggle graphics) and see if that works.

RAF68 · Post by **RAF68** » Sun Jan 03, 2010 2:29 pm

ZED normally the other switch if it is in toggle the first blow it must make visible the invisible switch has the condition that it is to connect has the invicible one

ian_scho · Post by **ian_scho** » Sun Jan 03, 2010 4:10 pm

In DMJava you had to CREATE the second switch from the first switch. I don't know if this is possable in RTC.

Post by **Gambit37** » Sun Jan 03, 2010 4:12 pm

You'll need to do something similar to what's discussed in this thread:

http://www.dungeon-master.com/forum/vie ... =6&t=28386

Zed5Duke · Post by **Zed5Duke** » Thu Jan 07, 2010 6:32 am

When switch have alternate state on/off then toggle it change this state instead of visible/unvisible.

Dungeon Master Forum

How make invisible switch to be visible?

How make invisible switch to be visible?

Re: How make invisible switch to be visible?

Re: How make invisible switch to be visible?

Re: How make invisible switch to be visible?

Re: How make invisible switch to be visible?

Re: How make invisible switch to be visible?