Page 1 of 1
Unable to get DM2 to work
Posted: Tue Mar 09, 2004 8:35 pm
by dawgmar98
I was curious to know if you could help me out. I have the original dungeon 2 program on disk. I really enjoyed it back when I purchased it. However with technology and Microsoft coming out with new versions of windows I am no longer able to get the game to work. As of last night I partitioned my HD so that I could install win95 with USB support was installed and keep my 2000 intact. I then installed DM2. When I run the setup to configure my video/sound cards the system seems to freeze up. I am able to do ctrl alt del to reboot which tells me the system is not locked just the program is hung. Do I need some other drivers for my sound/video cards? Any advice you could give would be greatly appreciated.
Thanks,
Kris
Posted: Wed Mar 10, 2004 3:37 am
by Daniel (Sweden)
Hello Kris!
You need an old soundcard to get DM2 to work, preferably a soundblaster or soundblaster 16. If you do have a new card in your machine it will be difficult to get it to work (DM2 is a very sensitive game). The easied way might be to download the Bootdisk available on this homepage (I dont know where exactly though). But you will still need a proper soundcard to get it to work.
The Best of Luck!
/Daniel (Sweden)
PS: What is your computer specifications by the way????
Posted: Wed Mar 10, 2004 9:51 am
by Gambit37
Or use DOSBox -- many of us have had good success with it and DM2:
http://www.dungeon-master.com/forum/vie ... hp?t=23483
At some point, I'll try and write a definitive guide for getting DM2 to work in Windows -- all the information is there in these posts, it just needs sorting and editing!
Posted: Wed Mar 10, 2004 5:11 pm
by Guest
Thanks gambit and daniel. I followed the instructions you left. I am now able to hear sounds when testing but when I run skull.exe I get the following errors
Error[35]: Unexpected interrupt=0000 in DOS4GW.EXE at 0160:D8AE
code=0000 ss=0168 ds-0168 es-0168
ax=0005 bx=ff52 cx=0000 dx=0000 sp=220e bp=0000 si=0160 di=0000
Im not sure what to do at this point
I am running the following
Windows xp sp1
IBM thinkpad R31
Intel(r) Pentium(r) III
Mobile CPU 1133 MHz
1.13 GHz
120 MB of RAM
Any help will VERY MUCH appreciated.
Posted: Wed Mar 10, 2004 5:15 pm
by Guest
Sorry forgot to sign-in the last reply was from Dawgmar98 not guest.
Thanks everyone
Dawg
Posted: Wed Mar 10, 2004 6:05 pm
by beowuuf
you need to use dm2.bat, not skull.exe
Posted: Wed Mar 10, 2004 6:41 pm
by Guest
OK just stamp the words stupid on my forhead. Running the DM2.bat run the program. No Ill start working on the sound problem.
Thanks everyone...
Dawg