Page 1 of 1
How make invisible switch to be visible?
Posted: Sun Jan 03, 2010 12:05 pm
by Zed5Duke
I placed invisible switch on wall and i cant make it visible by other switch. Tryed toggle and activate and its still invisible.
Re: How make invisible switch to be visible?
Posted: Sun Jan 03, 2010 12:30 pm
by beowuuf
Is this a lever? Try a normal switch (no toggle graphics) and see if that works.
Re: How make invisible switch to be visible?
Posted: Sun Jan 03, 2010 2:29 pm
by RAF68
ZED normally the other switch if it is in toggle the first blow it must make visible the invisible switch has the condition that it is to connect has the invicible one
Re: How make invisible switch to be visible?
Posted: Sun Jan 03, 2010 4:10 pm
by ian_scho
In DMJava you had to CREATE the second switch from the first switch. I don't know if this is possable in RTC.
Re: How make invisible switch to be visible?
Posted: Sun Jan 03, 2010 4:12 pm
by Gambit37
You'll need to do something similar to what's discussed in this thread:
http://www.dungeon-master.com/forum/vie ... =6&t=28386
Re: How make invisible switch to be visible?
Posted: Thu Jan 07, 2010 6:32 am
by Zed5Duke
When switch have alternate state on/off then toggle it change this state instead of visible/unvisible.