Something else about sound.......

[Ian]

I forgot to mention I'm using a boot disk with my SoundBlaster 16 setup for DM2. If someone wants the details of the config and autoexec, post here or mail me and I'll put them up here. However, they do rely on the SB16 folder being on the hard drive....Cheers, Ian.

[Franklin]

I haven't seen your previous post, but the following information may help? If you have windows, click on the Device Manager tab in System in Control panel. Then go to the properties of your sound card and then click the resources tab. Here you should see the Port, IRQ, DMA, etc. Make a change to your autoexec.bat to reflect what you see.

-= in autoexec.bat =-
SET BLASTER=A220 I5 D1 T4

Hope this helps.